Client nrpe_local.cfg

(command definitions)

command[check_load2]=/usr/lib/nagios/plugins/check_load --warning=5,4.5,4 --crit
ical=7,6.5,5.5
command[check_ping_mornir]=/usr/lib/nagios/plugins/check_ping -H mornir.fionavar.d
d -w 100.0,20% -c 500.0,60%
command[check_disk_mornir]=/usr/lib/nagios/plugins/check_disk -w 10% -c 5% -p /dev
/ide/host0/bus0/target0/lun0/part1
command[check_swap]=/usr/lib/nagios/plugins/check_swap -w 20% -c 10%
command[check_privoxy_local]=/usr/lib/nagios/plugins/check_http -I darien.fionav
ar.dd -p 8118 -u http://mornir.fionavar.dd
command[check_httpd_mornir]=/usr/lib/nagios/plugins/check_http -H mornir.fionavar.
dd -u http://mornir.fionavar.dd/

As you can see, the parameters are hard-coded. This is because there is no secure way to pass parameters over the network (with nagios).